Global Navigation
Main Navigation
Sub-Navigation
Content
Non-Toxic, Water-Base Products Proven Effective To Prevent or Correct Water Vapor and Moisture Problems In Concrete and Masonry
Moxie Chemically Reactive Products, Moxie 1800 Super-Admix, Moxie 1500 Concrete Sealer, Moxie 1600 Cleaner Sealer and Moxie Flooring Sealant II (MFSII), all use the concrete moisture to provide the solution.
With Moxie 1800 Super-Admix, the concrete moisture is used to provide the proper, prolonged, slow, moist curing enhancing, improving, and providing a portland cement based material which is impervious to the transmission of water and water vapor, as well as many other contaminants such as oil, petroleum and many acids.
MOXIE topically applied Chemically Reactive Sealers use the moisture within the concrete whether it may be extra unneeded mix water or moisture migration to stop further moisture problems.
Combat Moisture and Water Vapor with Moxie 1800 Super-Admix
Moxie 1800 Super-Admix is a ready-to-use, non-toxic, clear, odorless, liquid admixture of specifically engineered and formulated compounds which stop moisture migration above and below grade.
Added to the batch mix in proper amount, Moxie 1800 Super-Admix initiates chemical reactions to create colloidal gels instead of the typical bleed water. At initial surface set the gel-like character of the concrete acts like a thermal barrier that restricts rapid evaporation of the surface water which prevents shrinkage and slab curl, thereby eliminates plastic cracks.
These colloidal gels also protect the reinforcing steel from internal corrosion and will form additional cementitious materials that provide further protection from externally caused corrosion.
After the concrete hydration process is complete, the colloidal gels react with remaining by-products to form cementitious materials. The process takes place prior to, during, as well as after the final stages of hydration producing the maximum increase in strength and decrease in permeability.
Moxie 1800 Super-Admix is a fraction of the cost of many other alternatives.
For more information on Moxie 1800 Super-Admix, click here.
For use on existing concrete, these products penetrate into the concrete, sealing by reducing capillary voids, which eliminates water intrusion and inhibits corrosion.
Moxie 1500 – Concrete Sealer
A non-toxic, penetrating, permanent concrete sealer/hardener specifically formulated to penetrate and seal concrete up to seven inches. Moxie 1500 Concrete Sealer undergoes a chemical reaction, which stops water vapor transmission (.015 WVT perms) and water migration up to 231 feet below grade (100 psi) and reduces capillary voids to practically zero.
Moxie 1600 – Concrete Cleaner / Sealer
The only multi-purpose, ready-to-use, non-toxic, deep penetrating, permanent, concrete cleaner, sealer, and hardener -- specifically formulated to remove petroleum-base products and contaminants while sealing concrete.
MFS II Moxie Flooring Sealant II
PROBLEM FLOORS? Is your floor coming up? Has your flooring adhesive become unstable or worse?
This ready-to-use, non-toxic, penetrating, permanent concrete sealer is specifically formulated for the prevention of water vapor migration and alkali attack under floor materials and other impermeable surface treatments or coatings.
Proper preparation ensures that Moxie MFII Sealer will penetrate the concrete:
Moxie Flooring Sealant II, when applied properly, will penetrate deep into the capillaries of your concrete slab, and fill these conduits of problem moisture with cementitious material thereby "plugging up" all avenues for moisture migration. Moxie Flooring Sealant II is recommended by top manufactures of resilient, tile and wood flooring products.
For use on existing concrete, block or brick surfaces, these products coat and seal the surface to control water intrusion. They will not alter, stain, discolor or change the texture of the surface in any way.
Moxie 1300 – Brick SealerMoxie 1300 Brick Sealer is a ready-to-use, non-toxic, penetrating sealer specifically formulated for above grade, brick surfaces. Composed of inorganic, reactive, complex compounds which penetrate up to ¾", Moxie 1300 Brick Sealer undergoes a chemical reaction producing a hard silicone resin seal which outperforms silanes and siloxanes. This productis the most economical, cost effective and simplest solution for practically every brick or masonry application, all in one easy-to-use sealer.
Moxie 1400 – Block & Stucco Sealer
Moxie 1400 Block & Stucco Sealer is a ready-to-use, non-toxic, penetrating sealer specifically formulated for above grade, block, stucco and large pore surfaces. Composed of inorganic, reactive, complex compounds which penetrate up to ¾", Moxie 1400 Block & Stucco Sealer undergoes a chemical reaction producing a hard silicone resin seal. Field testing shows superior performance over silanes and siloxanes.
For use in repairing and cleaning concrete.
Moxie 2000 – Super PatchMoxie 2000 Super Patch is a high strength, cementitious mortar for patching or resurfacing concrete, masonry, wood, or asphalt surfaces above and below grade. Suitable for floors or walls, stucco, gunite and shotcrete repairs, Moxie 2000 Super Patch is not suitable for overhead repairs.
Moxie 3000 – Super SoapMoxie 3000 Super Soap is used for removing oil, grease, and soil from heavily soiled areas of concrete, painted or unpainted metal surfaces. This product may also be used for general cleaning of concrete surfaces. It is especially effective in service stations, repair shops, aviation service bays and similar industrial environments.
No matter how big or small your project, we welcome the opportunity to demonstrate the exceptional performance of our products.