Description:

Moxie 1400 Block & Stucco Sealer is a ready-to-use, non-toxic, penetrating sealer formulated for all types large pore masonry and concrete. it prevents water and moisture penetration on vertical, above-grade, block and masonry surfaces -- providing long-term protection, and suitable for interior and exterior decorative applications.

Composed of inorganic, reactive, complex compounds which penetrate up to ¾”, Moxie 1400 Block & Stucco Sealer undergoes a chemical reaction producing a hard silicone resin seal. Field testing shows superior performance over silanes and siloxanes.

Moxie 1400 Block & Stucco Sealer is suitable for interior and exterior decorative applications. It prevents water and moisture penetration, providing long-term protection.

 

Benefits:

Moxie 1400 Block & Stucco Sealer STOPS:

• Water absorption in large pore surfaces
• Alkali and Efflorescence attack
• Deterioration and penetration of contaminants

 

Moxie 1400 Block & Stucco Sealer RESISTS:

• Staining due to expansive clay soils
• Flaking, scaling and spalling due to freeze-thaw

 

Moxie 1400 Block & Stucco Sealer REDUCES:

• Internal chlorides by 50%, to as much as 90%

 

Moxie 1400 Block & Stucco Sealer PREVENTS:

• Rust and water-borne contaminant stains, decreasing maintenance costs
• Lichen, moss and fungus growth on the surface, eliminating potential danger or the need for periodic removal

 

Moxie 1400 Block & Stucco Sealer IMPROVES:

• Overall quality of concrete masonry units, stucco, gunite, shotcrete and mortar
• Resistance to deterioration of decorative surfaces

 

Moxie 1400 Block & Stucco Sealer INCREASES:

• Resistance to spalling
• Lifespan of the substrate

 

BUT Moxie 1400 Block & Stucco Sealer WON’T, alter, stain, discolor or change the texture of the surface in any way.

PLUS . . . Moxie 1400 Block & Stucco Sealer produces the benefits of a waterproof barrier, alkali, efflorescence inhibitor and dustproofing compound all combined in an environmentally safe and easy to apply block and stucco sealer. It eliminates the need for additional sealers or surface coatings and treatments.

Application Method:

• Spray over area using a low pressure, Hudson type sprayer. Allow a rundown of 12 inches during application which will assure adequate coverage. A brush or roller may also be used. Apply second coat within 5 minutes of first.
• Allow 24 hours curing for maximum performance.

 

Surface Coverage:  50-100 sq. ft. per gallon, two coats, depending on porosity.

 

Precautions:

• Do not allow to freeze.
• Avoid contact with eyes.
• Due to pH level, do not allow this product to come in contact with plant life or leather.
• Do not allow product to come in contact with glass, porcelain or ceramic tile, aluminum, zinc or galvanized steel - remove with a damp cloth immediately. Product will permanently etch or erode the smooth surface.
• Must be rinsed with water or removed with damp cloth immediately.
• DO NOT APPLY IN WINDY CONDITIONS.